Basket weave is one of the oldest parquet patterns and one of the simplest to describe: small groups of parallel blocks, each group set at a right angle to its neighbors, so the floor looks like woven strips. It is not as simple to specify. The pattern only closes up if the block sizes relate exactly, and because every square turns 90 degrees from the next, grain and color decisions show twice over. This guide explains the geometry in words, what the drawing needs to show, and how grade, color and layout affect a basket weave floor. Our Showcase page includes basket weave produced in our factory.
The geometry in words
A basket weave floor is built from square units. Each unit is a group of identical rectangular blocks laid side by side. In the next unit, the same group is turned 90 degrees. Repeat that across the floor and the units form a checkerboard of alternating directions.
The rule that makes it work is this: the combined width of the blocks in one group must equal the length of one block. Only then is each group a true square, and only then do the squares sit edge to edge without gaps or overlaps. If a group is three blocks wide, each block is three times as long as it is wide. If a group is two blocks wide, the block is twice as long as it is wide.
That relationship has to hold in the finished face dimension. A small difference between block length and group width repeats at every unit and accumulates along a row until the pattern opens up or runs out of square.
Common variations
Basket weave is a family of layouts rather than one fixed design. A drawing may show any of these:
- Simple basket weave. Square groups of parallel blocks, alternating direction unit by unit.
- Larger groups. More blocks per group, giving a finer stripe inside a larger square.
- Basket weave with insets. Small square pieces placed at the corners where units meet, which changes the block dimensions around them.
- Basket weave in a frame. A field of basket weave units inside a border.
Each variation changes the piece list. That is why we treat basket weave as parquet cut to the drawing you supply, rather than a catalog item.
Block sizes: taken from the drawing
At Vu Uy Wood, parquet is cut to a drawing. We do not publish a standard basket weave block, because the right size depends on the room, the scale the designer wants and how the units meet the walls. The block width, block length and number of blocks per group are taken from your drawing and confirmed at quotation.
A few points help when choosing the scale:
- Small units give a fine, textile-like floor that suits smaller rooms, corridors and formal spaces.
- Large units give a bolder checkerboard that reads clearly in large rooms, but makes the cut units at the walls more noticeable.
- Block width also sets how much grain each piece shows. Our widths run from 3-1/4” (83mm) to 9-1/4” (235mm) in current production, with 3” (76mm) to 12” (305mm) to order. For basket weave, the width is chosen with the group size in mind, because the block length follows from it.
What the drawing must show
| Drawing item | What to show |
|---|---|
| Unit | One square unit, dimensioned, with the number of blocks in it |
| Block | Width and length of each block, in inches and millimeters |
| Insets | Size and position of any corner squares or keys |
| Grain direction | An arrow on each block, or a note that grain runs along the length |
| Edge profile | Which edges carry T&G and which are square edge |
| Construction | Build, overall thickness and wear layer |
| Layout | Room plan with the start point, centerlines and unit direction |
| Borders | Frame width, corner detail and how the field meets it |
| Quantity | Number of units per room, plus border length |
Our general guide to custom parquet flooring from drawings explains how the drawing is reviewed. This article covers what is particular to basket weave.
Profile and construction
Our standard profile is Tongue & Groove on all four sides, with square edge available on request. In basket weave, blocks meet along long sides inside a unit and at ends and sides between units, so every edge is a working joint. Agree with the installer whether the pattern will use T&G throughout or square edge, because the profile decides the installation method. Our Tongue & Groove profile is intended for glue-down or nail-down installation.
We make solid, 2-layer and 3-layer constructions. 2-layer engineered is the construction most commonly used for herringbone and chevron, and a practical choice where floor height is limited, so it is a sensible starting point for other block patterns too. Our standard builds are 5/8” (15mm) overall with a 3mm sawn wear layer and 3/4” (20mm) overall with a 6mm sawn wear layer, with other thicknesses from 3/8” (10mm) to 13/16” (21mm) made to order. The construction for a specific design is confirmed at quotation.
Grade, grain and color across alternating squares
Basket weave turns the grain 90 degrees at every unit. Under directional light, one set of units reflects more light than the other, so the floor reads as two tones even in one color. That should be expected, not discovered on site.
- Grade. Premium and Select keep the faces quiet so the checkerboard carries the design. Natural and Rustic add knots and color movement inside each unit, which makes the floor livelier and the pattern softer. See oak flooring grades explained.
- Grain. Rift and quarter gives straight lines inside each block, which sharpens the stripes. Plain sawn or mixed adds figure and blurs them. Grain is specified separately from grade.
- Texture. A smooth surface makes the two-tone effect between units stronger. Wire brushing scatters light and softens it.
- Sheen. Matte, Extra Matte and Ultra Matte all reduce reflection. Lower sheen generally reduces the contrast between units.
- Color. Give a code from our library of 211 colors, or send your own reference. A two-color basket weave, with alternating units in different tones, needs each color referenced and approved on its own.
Approve color on a sample that shows at least two units side by side, so the change in grain direction can be judged. A single flat board does not show it.
Setting out the room
- Square or diagonal. Units can run square to the main wall or on the diagonal. A diagonal layout makes more cut pieces at the walls.
- Start point. Center the field on the room, the main sight line or a feature, so the cut units at opposite walls are balanced.
- Borders. A plain border hides cut units and absorbs walls that are out of square. Draw it with its width and corner detail.
- Adjoining areas. More than one format can be produced within one order using the same approved color reference, so a basket weave room can sit next to plank or herringbone in the same color.
Checklist: what to send for a basket weave quotation
- Drawing of one unit, with block width, length and blocks per group
- Insets or keys, if used, dimensioned
- Room plans with start point, centerlines and unit direction
- Border drawing and width, if used
- Construction, thickness, profile and installation method
- Grade, grain, color reference, texture and sheen
- Number of units per room and border length
- Delivery address or port
The Versailles panel guide covers a related panel pattern, if the design is moving in that direction.
Working with Vu Uy Wood
Vu Uy Wood manufactures made-to-order solid and engineered French White Oak flooring in Song Than 3 Industrial Park, Ho Chi Minh City, and has done so since 2006. Parquet, including basket weave, is cut to your drawing, and the block sizes are confirmed at quotation. Select Parquet as the format on the Specify page and send the drawing with your request; it is reviewed together with the specification. Every pattern, with produced and made-to-order sizes, is listed in our product catalog. We normally reply within one working day.