Working With Us

Flooring Drawing Review: What a Factory Checks Before Quoting

How a factory reviews flooring drawings before quoting: dimensions, patterns, borders and stairs, the questions sent back, and what the quotation confirms.

Vu Uy Wood · November 8, 2026
All buyer guides

A drawing tells a factory more about a floor than any product name. It shows where the herringbone turns, how wide the border is, how the stair nosing meets the landing and which rooms share a color. It also shows what is missing. Before a floor drawn by an architect or designer can be quoted, someone has to turn it into a list of pieces that can be cut, profiled, finished and packed. This article explains what we check when a flooring drawing arrives, the questions we typically send back, and what is confirmed in the quotation.

What a drawing review is for

The review has one job: to make sure every piece in the drawing can be built as drawn, and that nothing the price depends on has been left to assumption. It is not a site survey and it does not replace the installer’s setting-out. Responsibilities stay where they belong:

At Vu Uy Wood, a drawing is reviewed together with the specification, which is why it is best sent with the first request rather than after a quote.

Check 1: Units and dimensions

The first pass is about numbers.

Check 2: Pattern geometry

Each pattern has its own critical dimensions.

A pattern name alone rarely settles these points. Our article on chevron vs herringbone geometry explains why the drawing governs.

Check 3: Borders and frames

Borders are where drawings most often leave gaps.

For parquet with borders, our guide to custom parquet from drawings goes into the piece detail.

Check 4: Stairs and edges

Stairs and floor edges are drawn at a smaller scale than rooms, so details are easy to miss.

Stair parts are matched to the floor in color and finish and approved on a sample. See oak stair treads that match the floor.

Check 5: Construction and profile across areas

Where two areas meet, their builds have to work together.

Check 6: Color and finish per area

The drawing should say which color, texture and sheen go where. More than one format can be produced within one order using the same approved color reference, so a single master can cover a whole project. Where a drawing uses different tones in a field and a border, each tone needs its own reference and its own sample.

Check 7: Quantities

Quantities are read from the drawing by area and by piece type, in sq ft for floor areas and by count for stair parts and special pieces. The waste allowance for cutting and setting-out is the installer’s call; we ask who set it and on what basis, so it is applied the same way to every piece type, including both hands of a herringbone.

Items that are not flooring

Architect sets often show doors, cabinetry and built-in joinery next to the floor. Flooring is made in our own factory. Furniture, cabinetry and doors can be coordinated through our vendor network of partner workshops, and the quotation states clearly which items come from which source. The arrangement is described in flooring and joinery project supply.

Questions we typically send back

What the drawing showsQuestion sent back
“Herringbone, 5 inch”Is 5” (127mm) the face width, and what is the block length?
“Chevron” with no angle45° or 30°, and where should the first point fall?
A border with no corner detailMitered, butted, or a corner block?
Plank and herringbone in adjacent roomsSame overall thickness, or a transition detail?
Stairs on plan onlyTread depth, nosing profile, and are risers included?
One color named for the whole floorDoes the border share the field color, texture and sheen?
Total area onlyQuantity per area and per piece type?
Dimensions marked “verify on site”Who confirms them, and before which stage?

Answering these once, in writing, saves a round of questions and makes the first sample more useful.

What the quotation confirms

When the review is complete, the quotation states what will be built:

Custom pieces are made to drawing, confirmed at quotation. If the drawing is revised after that, send the revision with its number so the change can be reviewed against the confirmed version.

Before you send a drawing

Working with Vu Uy Wood

Vu Uy Wood manufactures solid and engineered French White Oak flooring to buyer specification in Song Than 3 Industrial Park, Ho Chi Minh City, and has done so since 2006, with herringbone, chevron, plank and parquet produced to drawing. Build your written specification on the Specify page and attach your drawings through the contact page; for projects that also include doors or cabinetry, see Project Supply. Drawings are reviewed together with the specification, and we normally reply within one working day.

More in Working With Us

Related guides

Your project

Build the floor around your specification

Construction, format, width, grade, color, texture and finish are set per order. Work through the options, or send us the floor you are trying to match.

WhatsApp Request a quote