Specification & Construction

Knot and Check Filling in Oak Flooring: Putty and Color

Knot filling in oak flooring explained: what gets filled, which filler types exist, how fill color is matched to the stain and how to judge filled boards.

Vu Uy Wood · November 16, 2026
All buyer guides
Close-up of two dark stained wooden boards side by side, the right one showing a round knot in the grain

Oak is a natural material, and natural material has features: knots where a branch once grew, small splits called checks, and the occasional pin hole or open pocket. In a grade that allows them, those features are either left open or filled. Filling is a manufacturing step with its own materials and color work, and it explains why two floors of the same grade can look quite different. This guide explains what gets filled, how the filler is matched to the finished color and how to judge the result on a sample.

Diagram: Knot and Check Filling in Oak Flooring, putty and color

What gets filled

Not every feature is treated the same way. A producer sorts features by what they do to the board.

Which of these a floor allows is set by its grade. In the grades on our Specify page, Premium has very few knots, Select has small sound knots, Natural has visible knots and color movement, and Rustic has larger sound knots and filled natural features. See the grades explained article for the full descriptions.

What the fillers are

Several filler families are used in wood flooring, and each has trade-offs.

Filler typeTypical behaviorTrade-off
Wood putty or paste fillerEasy to work, can be tinted, sands wellMay shrink slightly as it dries
Epoxy or two-part resinHard, stable, good for larger voidsTakes stain differently, harder to color match
Polyester or similar resinFast curing, sands flatCan show as a distinct patch if color is off
Hard wax fillerSoft and workableSuited to site repair more than factory work

The choice depends on the size of the feature, the finish system and the color. A fine check needs a thin, flexible filler. A large open knot needs a harder one that will not shrink out. We do not publish the filler system used at Vu Uy Wood on this page, and it is part of what is confirmed on the sample and at quotation for your finish.

Why color matching is the hard part

Wood takes stain by absorbing it. A filler does not absorb in the same way. That is the root of the difficulty: stain that colors the wood evenly can leave a filled patch lighter, darker or flat in tone.

Two approaches are common.

  1. Fill before staining. The filler is applied, sanded flush, and then the whole board is stained. The filler takes the stain differently from the wood, so the patch can read as a light or dark spot. Some producers use a filler designed to take stain to reduce the difference.
  2. Fill after staining. The board is stained first, and the filler is tinted to match the finished color and applied to the feature. This gives better control, but each color needs its own tint, and the filler has to match under the topcoat.

Both are used in practice, and a floor may use a mix. What matters to the buyer is that the filled areas are checked against the approved color on a physical board. The article on approving flooring color on a physical sample shows how to do it.

How finish and color change the look

Fill is easiest to hide in a dark, low-sheen, textured finish, and hardest to hide in a light, smooth, clear one.

If the aim is a floor with no visible fill at all, the practical answer is a cleaner grade, not a better filler.

Features that stay open

Some natural features are left alone on purpose. A tight knot with a sound edge, a fine surface check that does not run through the board and a small mineral streak are part of how oak looks, and filling them would make the floor look repaired. How much is left open depends on the grade. A Premium or Select face has few features to treat, so the question rarely arises. A Natural face keeps its sound knots visible. A Rustic face carries larger sound knots and filled natural features, so the filling is part of its look.

The decision belongs in the specification. Write whether you expect knots to be visible, and whether open features should be closed. A buyer who wants a rustic look with open character and a buyer who wants a rustic look with every feature closed are asking for two different floors, even though both write Rustic in the RFQ.

What can go wrong

Most problems with filled features show up in service, not on day one.

A floor with a good filling process has fewer of these, but cannot have none. The stability of wood is a limit that a filler can follow but not cancel.

How to judge a sample

A sample should show the features that production will contain, not only the best board in the set.

  1. Ask for boards that show the grade’s features. A Rustic floor sample should include filled knots and checks, not a clean board.
  2. View in daylight and room light. Fill that disappears under one light can show under another.
  3. Look from a low angle. A patch with a different sheen or a slight dip is easy to see at an angle.
  4. Touch the surface. The filled area should be flush with the board.
  5. Compare several boards. The way features are treated should be consistent across the sample set.
  6. Record what you approved. Photograph the approved boards, mark the features on the sample and keep the record.

Writing it into the specification

Questions to ask

QuestionA clear answer covers
Which features are filled?Knots, checks, pin holes, pockets
Is the filler matched to the finished color?Before or after staining
How is a loose knot handled?Sorted out or filled
Is the sample typical of the lot?Features shown as they will be in production
How is the fill checked?Visual check against the approved sample

Working with Vu Uy Wood

Vu Uy Wood manufactures solid and engineered French White Oak flooring to buyer specification in Song Than 3 Industrial Park, Ho Chi Minh City, and has done so since 2006. Grade is chosen on the Specify page, and the filled features of a grade are reviewed with you on a physical sample. We normally reply within one working day.

More in Specification & Construction

Related guides

Your project

Build the floor around your specification

Construction, format, width, grade, color, texture and finish are set per order. Work through the options, or send us the floor you are trying to match.

WhatsApp Request a quote