Sourcing & Compliance

First Order With a New Flooring Supplier: Step by Step

The first order with a new hardwood flooring supplier, step by step: a narrow first spec, the sample approval record, inspection, packing, documents and review.

Vu Uy Wood · November 5, 2026
All buyer guides

The first order with a new flooring supplier is different from every order after it. Neither side has a history to fall back on, so every assumption has to be written down. It is also the order that creates the records both sides will reuse for years: the specification, the approved sample, the label layout, the inspection standard and the document list. This guide walks through a first order step by step, with the emphasis on what to set up so that the second order is simpler than the first.

Keep the first order narrow

A first order tests the working relationship as much as the product. The fewer variables it carries, the clearer the result.

Made-to-order thicknesses, widths and custom parquet are all available. They are simply easier to add once the basics have been proven on a first shipment. If the project needs them now, that is fine; the steps below still apply.

Step 1: A specification with a reference

Write the specification as a document both sides can quote, not as a thread of emails. It should cover construction, thickness and wear layer, species, format, width, length, grade, color reference, texture, sheen, finish system, quantity per SKU in sq ft, and destination. The Specify page produces this as a written request with a reference number in the form VU-RFQ followed by a date code. Use that reference in every reply.

If anything changes, issue a new version rather than amending by email. A line such as Spec v2: width changed to 6” (152mm) is easy to trace. A change buried in the fourth message of a thread is not.

Step 2: Read the quotation against the specification

When the quotation arrives, check that every line of your specification is restated in it. Anything you left open will have been filled by the supplier, so look for those lines first. If a line in the quotation differs from your request, ask why before you move on. The quotation and the specification should describe the same floor.

Step 3: Sample, then a written approval

The sample is made with the intended production finish and reviewed as a physical board, in the light where the floor will be installed. What to ask for and how to check it on arrival are covered in our sample request guide.

On a first order, the approval record matters more than usual, because there is no earlier order to compare against. Write it down: specification reference and version, sample label, decision, any note on the acceptable range of character, name and date. The approved sample becomes the master reference, and we retain the approved panel for production and repeat orders. Keep your counterpart somewhere you can find it in a year.

Step 4: One order confirmation that holds everything

Order details and payment terms are confirmed at order confirmation. On a first order, use this step to collect every agreement in one place:

ItemWhat to record
SpecificationReference and version number
Approved sampleSample label and approval date
QuantitiesSq ft per SKU, and per format if more than one
PackingCarton contents, pallet build, moisture protection
LabelsFields on each carton, and the artwork for private label
Trade termTerm, named place and Incoterms edition
Payment termsAs agreed at confirmation
InspectionWho inspects, when, and against which standard
DocumentsThe list your broker and market require

Anything not on this sheet is likely to be handled differently from what you assumed. If two items conflict, settle it before production starts. Our article on the order process shows where this step sits in the full sequence.

Step 5: During production

If steps 1 to 4 are complete, there should be nothing new to decide while the run is in progress. Inside the factory, checks run through eight checkpoints from incoming material to packing, including color against the approved master panel and texture and sheen across the production lot.

What a first-time buyer can do is agree in advance how questions will be handled: who the contact is on each side, and how a query from the line reaches you. A quick answer to one question is worth more than a long list of updates.

Step 6: Inspection before loading

A first order is the one most worth inspecting before loading, by your own team or a third-party inspector. Agree the standard before the visit: the approved sample and the written specification, nothing else. Settle in advance what happens if goods fall outside it. The checks themselves are set out in pre-shipment inspection for hardwood flooring.

Keep the inspection report with the order file. On the next order it shows both sides what was measured and how.

Step 7: Packing, labels and documents

Carton labels identify the SKU and the production lot, which is what lets a problem found on site be traced to the lot it came from. For a private-label program, approve the carton artwork in writing before printing, because a first print run sets the template for every later order.

For documents, ask your customs broker which they need for your market before the goods ship, and send that list to the supplier with the order confirmation. For engineered flooring entering the United States, include CARB Phase 2 documentation covering the composite core. Do not wait for the bill of lading to find out a document is missing.

Step 8: Receive, record and review

When the container arrives:

Then write a short review. What went well, what took longer than it should, and what you would change in the specification, the labels or the packing. Send it to the supplier. A first order that ends with a written review produces a better second order than one that simply closes.

The first-order file

RecordCreated atReused for
Specification with versionStep 1Every repeat order of that SKU
Approval record and counterpart sampleStep 3Production, inspection and repeat orders
Order confirmation sheetStep 4The template for the next order
Inspection reportStep 6The standard method for later inspections
Label layout and artworkStep 7All later cartons
Document listStep 7Every shipment to that market
Review notesStep 8Changes to the next specification

If you are still deciding whether to place a first order at all, start with how to vet a hardwood flooring factory.

Working with Vu Uy Wood

We manufacture solid and engineered French White Oak flooring to buyer specification in Song Than 3 Industrial Park, Ho Chi Minh City, and have done so since 2006. Every order, first or repeat, follows the same route from specification and sample approval through production, inspection and packing, and the approved panel is kept as the master reference for the orders that follow. Start a first order on the Specify page, or send your specification through the contact page. We normally reply within one working day.

More in Sourcing & Compliance

Related guides

Your project

Build the floor around your specification

Construction, format, width, grade, color, texture and finish are set per order. Work through the options, or send us the floor you are trying to match.

WhatsApp Request a quote