Importers and specifiers who want to see hardwood flooring suppliers in person have several shows to choose from in 2027, in Las Vegas, Fort Worth, London and Sydney, and the next DOMOTEX in Hannover is listed for January 2028. This page lists the dates as the organisers show them, says what each show is good for, and gives a plan for using a visit so that it ends in a specification and a sample, not a stack of brochures. Dates are per organiser as of October 2026 and can change, so check the organiser page before you book travel.
The calendar
| Show | Dates (per organiser) | Place | Organiser | Suits |
|---|---|---|---|---|
| Surface Design Show | 2 to 4 February 2027 | Business Design Centre, London | Montgomery Group | UK specifiers, architects and designers |
| Surfaces (tise, The International Surface Event) | Exhibit hall 2 to 4 February 2027; education 1 to 4 February 2027 | Mandalay Bay Convention Center, Las Vegas | Informa Markets | US flooring distributors, retailers and contractors |
| NWFA Wood Flooring Expo | 27 to 29 April 2027 | Fort Worth, Texas (venue not named on the page we opened) | National Wood Flooring Association | Wood flooring trade and installers in the US |
| Sydney Build Expo | 28 and 29 April 2027 | ICC Sydney | Nineteen Group | Australian builders, architects and specifiers (building trade in general) |
| Futurebuild | 11 to 13 May 2027 | Excel London, Halls N1, N3 and N4 | Not named on the page; the footer shows Media 10 | UK construction and specification |
| Surfaces | 1 to 3 February 2028 | Not stated for this date on the page | Informa Markets | Listed as a future date on the organiser page |
| DOMOTEX | 17 to 20 January 2028 | Hannover Exhibition Grounds | Deutsche Messe | The organiser’s home page lists 2028 as the next edition |
Sources are the organiser pages named in the sources list below. For Surfaces, the organiser lists the exhibit hall for 2 to 4 February 2027 and the education programme for 1 to 4 February 2027. The NWFA page gives the dates and city but not the venue or the exhibit hall days. For DOMOTEX, the organiser’s page states the 2028 dates and we did not find a 2027 Hannover edition listed there, so plan for 2028. We could not open an organiser page for a Japanese building or interior show, so no Japanese show is listed; dates for Japan are not confirmed by an organiser page we read.
What each kind of show is for
- Flooring trade shows (Surfaces, NWFA Expo, DOMOTEX). The visitors are distributors, retailers, contractors and installers. Exhibitors show current ranges, finishes and installation products. They suit a buyer who is building or refreshing a range.
- Design and specification shows (Surface Design Show, Futurebuild, Sydney Build Expo). The visitors are architects, designers and builders. They suit a specifier who wants to see materials in a range of categories at once, with flooring as one of many.
The NWFA is a membership organisation and its expo is a trade event. Attending the expo or being a member is not a quality certification of any exhibitor. Treat what you see as a starting list.
Before the show: arrive with a specification
A show visit is short, and a supplier cannot quote a floor from a conversation in an aisle. The way to use the time is to arrive with a written specification and a short list of questions. Our RFQ checklist lists the fields a factory needs, and the Specify page builds the same specification in six decisions, as described in the Specify walkthrough.
Prepare these items:
- The build. Construction (solid, 2-layer or 3-layer), overall thickness and wear layer, width and length, grade, texture, sheen and finish system.
- The color reference. A physical board, a fan deck reference or a library code. A photograph is a starting point only. See approving color on a physical sample.
- The destination and the market. Where the floor is going and which documents your customs broker, importer of record or specifier will ask for. The compliance calendar for 2027 shows the EU and US dates.
- The decision rule. Who approves a supplier on your side, and what you need to see before a sample is ordered.
At the show: what to ask and what to look at
A booth sample is a display piece. It is made for a show, shown in show lighting, often finished by hand. Use it to understand the look and the level of detail, not as an approval sample. Four questions give you more than a catalog does:
- How is the sample made? A board finished on a production line with the intended production finish is a fair preview of the order. See the sample request guide.
- Which sizes are produced and which are made to order? A size chart from the supplier should separate the two.
- Who makes the floor, and where? Ask for the named site. The guide to vetting a flooring factory explains why the answer matters.
- What happens between the approved sample and the container? Look for a described process with inspection points, as in the eight-step order process and the quality control checkpoints.
Look at the cut end of a board to see the wear layer, core and backing, and join two boards by hand to feel the profile. Turn a board under a low light to see texture and sheen. Take notes the same day, because three days of booths blur together.
After the show: turn contacts into samples
The weeks after a show matter more than the days at it. A sensible sequence:
| When | What to do |
|---|---|
| Within a week | Send each short-listed supplier the written specification, not a verbal summary, and ask for a quotation |
| Within a month | Compare quotations line by line using the quote comparison guide; order samples to the same specification from two or three suppliers |
| After samples arrive | Review in the lighting of the project, one variable at a time, and record the decision |
| Before the first order | Ask for a video call on the line or plan a factory visit; read the first order guide |
If your travel takes you to Asia in the same year, a factory visit after a show is often easier to justify because the specification is already written and the short list is short.
Checking dates before you commit to travel
Organisers move dates and venues. A date listed in October 2026 is not a promise, and this page is not updated after it is published. Before booking, open the organiser page, confirm the dates, ask whether the exhibitor list includes flooring producers in your category, and check visa and registration requirements if you are travelling from abroad. If a show has been postponed, the organiser’s page is the authority.
Sources
- Surfaces: intlsurfaceevent.com, Informa Markets, opened 25 October 2026 (exhibit hall 2 to 4 February 2027; education 1 to 4 February 2027; future date 1 to 3 February 2028).
- NWFA Wood Flooring Expo: 2027.nwfaexpo.org, opened 25 October 2026 (27 to 29 April 2027, Fort Worth, Texas).
- Surface Design Show: surfacedesignshow.com, Montgomery Group, opened 25 October 2026 (2 to 4 February 2027, Business Design Centre, London).
- Sydney Build Expo: sydneybuildexpo.com, opened 25 October 2026 (28 and 29 April 2027, ICC Sydney).
- Futurebuild: futurebuild.co.uk, opened 25 October 2026 (11 to 13 May 2027, Excel London).
- DOMOTEX: domotex.de/en, Deutsche Messe, opened 25 October 2026 (2028 edition listed for 17 to 20 January at the Hannover Exhibition Grounds).
Working with Vu Uy Wood
Vu Uy Wood manufactures solid and engineered French White Oak flooring to specification in Song Than 3 Industrial Park, Ho Chi Minh City, and has done so since 2006. Whether or not you attend a show, you can build a specification on the Specify page, browse the color library and send both through the contact page, and we will respond within 24 business hours.