A dealer buys the same floor many times. The first container sets the range on the showroom wall, and every later container has to match the sample a customer took home. This guide is for flooring dealers, showroom owners and retail buyers who source engineered oak from a made-to-order factory. It works through the three jobs that decide whether that relationship runs smoothly: planning a range, building a sample set, and keeping reorders consistent. It uses only facts already published on this site, such as the color library and the order process, and it links to the detailed article for each step.
Job one: plan the range from the library
A dealer range is a small set of floors chosen to cover most customer requests without repeating itself. The color library is the natural starting point because every color has a code, a tone, an undertone and a collection. The library holds 211 colors in seven collections:
| Collection | Colors in the library |
|---|---|
| Modern Loft | 79 |
| Natural Retreat | 45 |
| Smoked Atelier | 22 |
| Nordic Haven | 21 |
| Golden Heritage | 21 |
| Noir Studio | 14 |
| Rustic Manor | 9 |
The same colors are also sorted by tone and undertone. By tone: 7 very light, 41 light, 83 medium, 48 dark and 32 very dark. By undertone: 131 warm, 73 neutral, 6 cool and 1 warm red. You can filter the library by these fields on the colors page.
A way to choose, not a number to hit
There is no correct number of colors for a showroom. Use the grid instead. Pick the lightest, middle and darkest tone that your customers ask for, then check each against the undertones you need. Gaps show up quickly: a dealer who sells many warm mid-tones and nothing neutral loses the customer who brings gray fabrics. Our guide to choosing oak floor color by undertone explains why undertone, not tone, drives most rejections. If you plan to sell cooler floors, read the gray and greige guide and the notes on white and cream oak first.
After color, fix the build. The current production sizes are the safest base for a first range, because they are builds the factory already runs:
- Plank width: 3-1/4” (83mm), 3-1/2” (89mm), 5” (127mm), 6” (152mm), 7-1/2” (190mm), 9” (229mm) and 9-1/4” (235mm).
- Overall thickness: 5/8” (15mm) and 3/4” (20mm), with a 3mm sawn wear layer on 5/8” and 6mm on 3/4”.
- Length: random length from 12” to 86” (300 to 2200mm).
Other widths and thicknesses are made to order and confirmed on the specification. The size chart lists them all. If customers ask for wide boards, read wide plank oak before you decide the widest board you will carry, since width affects how installers and subfloors cope.
Add patterns last. Herringbone is produced in 3-1/4” (83mm), 3-1/2” (89mm), 5” (127mm), 7-1/2” (190mm) and 9” (229mm) widths, which gives a showroom a pattern line without a long list. The herringbone specification guide covers left and right blocks, and chevron vs herringbone helps you decide whether to show one or both.
Job two: build a sample set that sells and protects you
A showroom sample is a promise. If it is a hand-finished chip, the first container may not look like it. If it is a single board, a customer cannot judge the grade. A sample set should answer four questions.
| What the customer or you need to know | Sample to hold | Where to read more |
|---|---|---|
| Is this the color, texture and sheen? | A board made on the production line with the intended finish, for each color you stock | Sample request guide |
| How much character will the floor show? | Several boards per grade, covering lightest and heaviest | Grades explained |
| Is it really engineered oak, and how thick is the top layer? | A cut end showing wear layer, core and backing | Wear layer guide |
| Will it install cleanly? | Several boards joined by hand along long sides and ends | Tongue and groove accuracy |
Label and file every sample
Ask for a label on the back of each board: specification or request reference, color code and name, construction, width, grade, texture, sheen and finish, sample round and date. Specifications submitted through the Specify page receive a reference beginning with VU-RFQ, and quoting it on the label ties the board to the written specification.
Keep a counterpart of every approved sample. The factory retains the approved panel as the master color reference for production and repeat orders, and the dealer’s counterpart is what lets you settle a question months later. Write the approval down: reference, sample label, decision, notes on acceptable range, who approved, and where the counterpart is kept. Our article on approving color on a physical sample shows the review step by step, and it is the best habit to teach your sales team.
Show the customer what the sample cannot
Natural oak changes between boards, which is why a sample set holds more than one board per grade. Tell customers before they buy that color varies within the grade, and show them why with the stain variation article or a simple printed note. It is cheaper to explain at the counter than after installation.
Job three: keep reorders consistent
Dealers feel inconsistency before anyone else, because a customer will lay a new box beside an old one. Three controls matter.
1. Lock the specification for each SKU. Each floor you sell should have a written specification that does not change between orders: construction, thickness and wear layer, species, format, width, length, grade, profile, texture, sheen, finish system and the approved color reference. Change one field, even a sheen level, and you have a new SKU. The table in our OEM and private-label article shows a complete SKU specification.
2. Reorder against the master, not the last lot. The factory checks repeat orders against the retained master panel. If you compare each lot with the previous one, small differences add up over several orders. Ask at the start who holds the master panel, how each lot is compared before packing, and what happens if a lot falls outside the approved range.
3. Read the carton label. Carton labels identify the SKU and the production lot. Make sure your system records the lot, and ask for lots to be kept together on a pallet. When a customer reorders for a room, tell them which lot their first boxes came from so the new boxes can be matched. The fields to request on a label, from your SKU code to the carton number, are listed in the export packing article.
The eight steps, from the dealer’s chair
The order process runs in eight steps: choose the product, select or develop color, produce a sample, approve the sample, confirm the order, run mass production, inspect, and pack and ship. For a dealer, the steps with the most leverage are the early ones. Settle product, color and sample approval before you talk about quantity, because everything after them follows the approved master. Quantities, destination, packaging and labeling details are confirmed at order confirmation, and terms are agreed there too. The first order walk-through is the shortest summary to hand a new buyer on your team.
When to use your own brand
Some dealers sell the factory’s color names, and some sell under their own. For a dealer brand, the arrangement is OEM or private label: the factory makes the floor, and your brand and packaging go on the carton. The OEM and private-label guide explains how each SKU is locked, how color is developed against your reference, how cartons are branded and how confidentiality works. This guide is for the dealer’s day-to-day range, samples and reorders. The retail space article deals with a different question: specifying oak flooring for a retail interior.
Quoting and comparing
When you compare two supplier quotations, line them up on the same four numbers: length, width, overall thickness and wear layer. The quote comparison guide shows which lines hide differences, and the cost drivers article explains what moves a quotation. Do not compare on width and thickness alone.
Dealer checklist
- Range planned on a tone and undertone grid from the library, not on a target count
- Builds taken from current production sizes first
- Each showroom sample made on the production line with the intended finish
- Several boards per grade, plus a cut end and a profile set
- Every sample labeled with the specification and round, and a counterpart kept
- Each SKU written down with its locked specification
- Repeat orders checked against the master panel
- Lot number recorded on every carton and passed to the customer
- Approvals written down and filed
Working with Vu Uy Wood
Vu Uy Wood manufactures solid and engineered French White Oak flooring to specification in Song Than 3 Industrial Park, Ho Chi Minh City, and has done so since 2006. Dealers can shortlist tones in the color library, build each specification on the Specify page, and send the range plan through the contact page. We respond within 24 business hours.